Since the AT2020 comes with a USB cable for easy connecting to your PC, you can quickly attach this mic to your computer using the standard USB cable. However, at a moderate SPL of around 70 to 76 dB, you will find the digital resolution at about 10 bits. If you are using the AT2020 at close range using your singing voice at 90 t0 95 dB SPL, it will have an effective resolution at around 12 to 13 bits. The AT2020 will clip at around 112 to 115 dB SPL. Since the AT2020 makes use of fixed gain before the signal enters the converter, you will not see any max SPL rating on its spec sheet. If you can’t find any gain adjustment feature on the software, you can then go to your PC’s Control Panel and select Sound. You will find this gain adjustment feature on the software, depending on the DAW you are using. So, you need to adjust the gain on your DAW.

Of course, you will not find gain adjustment on the mic. This range level is somewhere between -18dB and -6dB. Doing this helps you record at the software’s quality level.

In this way, you can hit the sweet spot or the ideal balance of your voice’s natural volume and the mic’s sensitivity. In most instances, you must adjust the gain on the mic. Once you’ve set up this mic on its stand, you can follow the guide and tips below to improve your recording result with your AT2020 microphone. This mount stand pivots, allowing you to make the precise placement for this microphone. The AT2020 comes with a threaded stand mount that you can attach firmly. If you are a bit worried about setting up your AT2020, just take a deep breath and relax, for it is quite easy to set up. Conclusion Recommended Settings for Audio Technica AT2020 USB & XLR for Optimal Recording Quality

At2020 usb not working